Sibelle - 2015

50 metre Custom
FDHF

Complex simplicity

Sibelle’s exterior lines are by Frank Laupman from Omega architects, assisted in the refinement of the design details by Mikhail Labazov and Andrei Savin from Architectural Bureau A-B Studio. The complex simplicity oxymoron epitomizes in two words the philosophy that led the design team in the development of this project. Sibelle’s elegant exterior lines are emphasized by contrasting bands of wraparound glass that give her a very distinctive look. The exterior lines look like they are running parallel, but in reality they are not! It is all about small adjustments that give an impression of parallelism to the eye.

First impressions

Sibelle is a 50 metre fully custom motor yacht, below 500 Gross Tonnage with an aluminum hull and superstructure. Large enough to offer her owner and his guests everything they need without compromise, whilst being small enough to allow plenty of freedom to anchor in bays with crystal clear water.

Specifications

General

Hull type: FDHF

Exterior design: Omega Architects & Architectural Bureau A-B Studio

Interior design:

Hull: Aluminium

Dimensions

Length over all: 49.90 metres / 163 feet 9 inches

Beam over all: 9.0 metres / 29 feet 6 inches

Draft (half load): 2.15 metres / 7 feet 1 inches

Tonnage: approx. 499 GT

Accommodations

Crew: 11

Guests: 10

Cabins: Full-beam owner’s stateroom, two double guest suites and two twin guest suites

Technical Details

Maximum speed (half load): 18.5 knots

Range: 3,150Nm at 13 knots

Fuel capacity: 49,000 litres / 12,844 US Gallons

Fresh water: 14,000 litres / 3,698 US Gallons

Propulsion Details

Main engines: 2 x MTU 8V 4000 M63

Maximum power: 2 x 1,000kW

Main generators: 2 x Kilo-Pak, each 99kW

Bowthruster: HRP 135kW, hydraulically driven

Stabilisers: Quantum extendable, 2 fins, zero speed

General arrangement

Sun deck

Wheelhouse deck

Main deck

Lower deck

FEEL INSPIRED? PLEASE CONTACT US:

Mark Cavendish, Johan Kaasjager, Robert Drontmann